Post by Candyman on Apr 25, 2008 9:06:50 GMT -8
Start is pin #6, yellow.
B+ is pin #1, red.
Ignition is pin #7
The wiring is quite easy. All you have to do is tap into a 12 volt switched feed to one post on the button. Then run a patch from the other post on the button to the yellow wire coming out of the steering column bundle. You can use the key or the button. Thanks to all who helped with suggestions. Happy New Year.
www.panteraplace.com/page183.htm
www.crxmpg.com/diy-push-button-start/
2003 Chrysler PT Cruiser Wiring Diagram
Battery Constant 12v+ Positive Wire (+): Pink/Black and Red
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness
Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness
Ignition Positive Wire (+): Blue
Ignition Positive Wire Location: Ignition Switch Harness
Accessory Positive Wire (+): Black/Orange
Accessory Positive Wire Location: Ignition Switch Harness
Key Sense Negative Wire (-): Light Blue
Key Sense Negative Wire Location: Ignition Switch Harness
Parking Light Positive Wire (+): Black/Yellow
Parking Light Positive Wire Location: At Headlight Switch
Power Door Lock Negative Wire (-): White/Green (1-Wire Door Lock System). This vehicle uses a 1-wire door locking system, lock requires a (-) negative through a 3000 ohm resistor and unlock, requires a (-) negative through a 7200 ohm resistor, and requires a double pulse to unlock. Some unit also require 2 extra relays.
Power Door Lock Negative Wire Location: In Drivers Kick Panel, At Door Harness See Diagram
Power Door Unlock Negative Wire (-): Same Wire
Power Door Unlock Negative Wire Location: N/A
Door Trigger Positive Wire (+): This vehicle has 2 door trigger wires a tan (-) or tan/blue (-) in the drivers kick panel for the drivers door and a blue/orange (-) in the passengers kick panel is for all other doors. When using an alarm system use both wires and diode isolate.
Door Trigger Positive Wire Location: In Each Kick Panel
Domelight Supervision Wire: Tan (-) or Tan/Blue (-) (Requires Relay)
Domelight Supervision Wire Location: In Drivers Kick Panel
Horn Negative Negative Wire (-): Black/Red
Horn Negative Negative Wire Location: At Steering Column Harness
Tachometer Wire Negative Wire (-): Black/Gray
Tachometer Wire Negative Wire Location: At Ignition Coil
Brake Light Positive Wire (+): White/Tan
Brake Light Positive Wire Location: At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-): Disarms With Unlock
Factory Alarm Disarm Wire Location: N/A
Factory Anti-Theft Wire (-): Chryslers Sentry Key (Gray Key Only) A Transponder System.
Factory Anti-Theft Wire Location: Transponder At Ignition Switch Tumbler.
ravenwingperformance.net/Lighting_Electrical/Ignited_Starter-Button-Kit.html
B+ is pin #1, red.
Ignition is pin #7
The wiring is quite easy. All you have to do is tap into a 12 volt switched feed to one post on the button. Then run a patch from the other post on the button to the yellow wire coming out of the steering column bundle. You can use the key or the button. Thanks to all who helped with suggestions. Happy New Year.
www.panteraplace.com/page183.htm
www.crxmpg.com/diy-push-button-start/
2003 Chrysler PT Cruiser Wiring Diagram
Battery Constant 12v+ Positive Wire (+): Pink/Black and Red
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness
Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness
Ignition Positive Wire (+): Blue
Ignition Positive Wire Location: Ignition Switch Harness
Accessory Positive Wire (+): Black/Orange
Accessory Positive Wire Location: Ignition Switch Harness
Key Sense Negative Wire (-): Light Blue
Key Sense Negative Wire Location: Ignition Switch Harness
Parking Light Positive Wire (+): Black/Yellow
Parking Light Positive Wire Location: At Headlight Switch
Power Door Lock Negative Wire (-): White/Green (1-Wire Door Lock System). This vehicle uses a 1-wire door locking system, lock requires a (-) negative through a 3000 ohm resistor and unlock, requires a (-) negative through a 7200 ohm resistor, and requires a double pulse to unlock. Some unit also require 2 extra relays.
Power Door Lock Negative Wire Location: In Drivers Kick Panel, At Door Harness See Diagram
Power Door Unlock Negative Wire (-): Same Wire
Power Door Unlock Negative Wire Location: N/A
Door Trigger Positive Wire (+): This vehicle has 2 door trigger wires a tan (-) or tan/blue (-) in the drivers kick panel for the drivers door and a blue/orange (-) in the passengers kick panel is for all other doors. When using an alarm system use both wires and diode isolate.
Door Trigger Positive Wire Location: In Each Kick Panel
Domelight Supervision Wire: Tan (-) or Tan/Blue (-) (Requires Relay)
Domelight Supervision Wire Location: In Drivers Kick Panel
Horn Negative Negative Wire (-): Black/Red
Horn Negative Negative Wire Location: At Steering Column Harness
Tachometer Wire Negative Wire (-): Black/Gray
Tachometer Wire Negative Wire Location: At Ignition Coil
Brake Light Positive Wire (+): White/Tan
Brake Light Positive Wire Location: At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-): Disarms With Unlock
Factory Alarm Disarm Wire Location: N/A
Factory Anti-Theft Wire (-): Chryslers Sentry Key (Gray Key Only) A Transponder System.
Factory Anti-Theft Wire Location: Transponder At Ignition Switch Tumbler.
ravenwingperformance.net/Lighting_Electrical/Ignited_Starter-Button-Kit.html
