|
|
Post by Candyman on Oct 18, 2009 3:29:29 GMT -8
Hey Everyone, It is my hope to start posting how to dis-assemble a PT's interior, and then show how to redo, and install new custom upholstery on your own at home, and achieve a great professional look. We will be going through how to install new Carpeting, New Leather Seat Coverings, Door Inserts, and more. So kick back, and enjoy as we get ready to tear the Interior apart one piece at a time.  SORRY, THIS GUIDE IS CURRENTLY UNDER CONSTRUCTION. PLEASE CHECK BACK SOON. THANK YOU |
|
|
|
Post by Candyman on Dec 7, 2009 10:03:10 GMT -8
Headliner Removal for the older 2001 - 2005 Body Style PT.
Remove your visors torx head screws,2 on the visor & 1 Phillips head on the catch. Unscrew the handles in the headliner but not all the way, there are round plastic catches behind liner. Remove all door pillar post A,B, &C posts. Unplug any electrical connections, Overhead console, Illuminated visors. No need to disconnect dome light in middle of headliner because that is wired and plugged in up front in A pillars. Watch how B pillars are removed because you have to replace them,they're tricky because of the seatbelt adjuster and the weatherstripping. The pillar post have 1 or 2 metal tanged inserts that have to be removed from the metal pillar behind pillar post, they can be squeezed together when pulled out.Remove rear seats and tilt passenger seat flat and drivers seat back. Remove plastic cover by speakers and along top of liner in rear. There are 2 plastic buttons that have to be taken out up in th rear ceiling. Get someone to help remove the headliner by tilting to the passenger side and pulling out the back.Might not be a bad idea to wear throw away plastic gloves so you keep the headliner clean.
|
|
|
|
Post by Candyman on Mar 14, 2010 22:58:46 GMT -8
FLOOR CONSOLE REMOVAL: 2001 - 2005 MODELS
To remove the console,pull back on the e-brake as far as possible,undo the four screws,and unscrew the lumbar handle if your car is so equipped. Next put the seats in the reclined position and move them all the way back.Lift the console enough to get your hand under it and undo the socket plug and the window switches.Pull up on the rear of the console pressing in on the back ends a little and push forward and upward clearing the e-brake.
|
|
